EXCLUSIVE ATELIER COLLECTION    |    15-YEAR DESIGNER WARRANTY    |    COMPLIMENTARY MEASURE PROTECTION    |    AUSTRALIA-WIDE DELIVERY
ATELIER
BLINDS
ORDER SAMPLES0

DIY installation

Curtain Installation Guide

For this setup, this installation sequence uses the original supplied curtain-installation artwork. It applies to Atelier S-Fold / Wave Fold curtains; select the correct wall or ceiling fixing method for your substrate.

Double curtains: install both tracks in the planned order, with the sheer layer closest to the window and the blockout layer room-side.

1. Check your track and brackets

At this stage, lay the track and supplied brackets out on a clean surface. Confirm the track orientation and the bracket type for your ceiling or wall mounting method.

2. Position the brackets

For the measurements, set the bracket positions along the track and check the fixing locations before marking the ceiling or wall.

3. Mark the fixing points

When configuring this option, hold each bracket in its final position and mark the fixing points accurately with a pencil.

4. Check for ceiling battens

Before moving on, for a ceiling fit, locate a sound fixing point. The supplied installation diagrams show the preferred bracket relationship to ceiling battens and what to consider if a batten is not directly available.

5. Drill the marked points

For this setup, drill at the marked fixing points using a bit and fixing method suitable for the actual substrate.

6. Fix the brackets

At this stage, secure the brackets firmly and keep them aligned so the track can clip in without twisting.

7. Clip the track into place

For the measurements, offer the track up to the brackets and click it into position along the full length.

8. Tighten and re-check

When configuring this option, once the track is seated, tighten the bracket screws and check that the track is straight and secure.

9. Prepare the curtain panels

Before moving on, lay the S-Fold / Wave Fold curtain panels out cleanly and identify the correct leading edge and stacking direction before hanging.

10. Hang the curtains

For this setup, attach the curtain hooks/runners to the track in sequence, keeping the fold spacing consistent and avoiding skipped runners.

Ready to hang your curtains?

At this stage, work from one end of the track to the other, then dress the S-Fold / Wave Fold pattern evenly before final adjustment.

DESIGN & ORDER CURTAINS